| Genauigkeit | Standard: bis zu 0,05 % |
|---|---|
| Prozesstemperatur | -40°C... +110°C |
| Nenntemperatur | -40~200℃ |
| Kommunikationsoberfläche | Abhängig von dem spezifischen Instrument |
| Die Situation | neu |
| Process temperature(Standard) | -40 to +125 °C (-40 to +257 °F) |
|---|---|
| Process connections | Threaded, flange, hygienic, remote seal |
| Applications | hygienic, chemical, and oil & gas applications |
| Wetted materials | 316L stainless steel, Alloy C, Tantalum (optional) |
| Output signal | 4 to 20 mA with HART |
| Warnungs-Ertrag | Kein Fluss, hohe Warnung und niedrige Warnung |
|---|---|
| Flüssigkeitsmedien | Luft, Wasser, Öl, Gas |
| Diagnostik | Grundlegende Diagnostik, Prozesswarnungen, Schleifenintegritätsdiagnostik, gesteckte Impulsleitungsd |
| Kommunikationsprotokoll | 4-20 MA HART®, WirelessHART®, FOUNDATIONTM Feldbus, PROFIBUS® PA, 1-5 V Niedrigleistung HART® |
| Drahtlose Aktualisierungsrate | 1 Sek. bis 60 Minuten, benutzerdefinierbar |
| Marke | Guanghua |
|---|---|
| Präzision | ±0.25%、 ±0.5% |
| Das Ausgangssignal | 4 | Zweidrahtsystem DCs 20mA |
| Klimafeuchtigkeit | 0~100% |
| Lieferzeit | 4-8 Woche |
| Produktbezeichnung | Fischers FIELDVUE DLC3010 DLC3020 DLC3020F Digitale Niveaubegerät |
|---|---|
| Marke | Fischer |
| Modell | DLC3010 und DLC3020 |
| Gefährliche Bereichs-Klassifikation | Ex h IIC Tx GB |
| Genauigkeit | 0,15 |
| Umgebungsrelative Luftfeuchtigkeit | ≤93%RH |
|---|---|
| Verbindungsart | Flansch, Faden |
| Steuersignal | 4-20mA/0-10V |
| Positionierer | Optional |
| Nenndurchmesser | DN15 - DN600 (½ "–24") |
| Kommunikationsprotokoll | 4-20 HART |
|---|---|
| Prozesstemperaturspanne | Bis zu 1300 °F (705 °C) oder 1922 °F (1050 °C) |
| Umgebungstemperaturbereich | 40 bis +149 °F (-40 bis +65 °C) |
| Messart | Sauerstoff, Zirkonoxid – gelötete Scheibe |
| Abmessungen | Sondenlängenoptionen von 18 Zoll bis 6 Fuß |
| Garantie | 3 Jahre |
|---|---|
| Modellnummer | DL3010 |
| Montagetyp | Integral montiert |
| Datenschnittstelle | verdrahtet |
| Max -Auslassdruck | 145 Psig |
| Process temperature(Standard) | -40 to +125 °C (-40 to +257 °F) |
|---|---|
| Process connections | Threaded, flange, hygienic, remote seal |
| Applications | hygienic, chemical, and oil & gas applications |
| Wetted materials | 316L stainless steel, Alloy C, Tantalum (optional) |
| Output signal | 4 to 20 mA with HART |
| Kommunikationsprotokoll | 4-20 HART |
|---|---|
| Prozesstemperaturspanne | Bis zu 1300 °F (705 °C) oder 1922 °F (1050 °C) |
| Umgebungstemperaturbereich | 40 bis +149 °F (-40 bis +65 °C) |
| Messart | Sauerstoff, Zirkonoxid – gelötete Scheibe |
| Abmessungen | Sondenlängenoptionen von 18 Zoll bis 6 Fuß |