| Versorgungs-Medien | Luft, Erdgas, Stickstoff |
|---|---|
| Datenoberfläche | mit Kabel |
| Schalenmaterial | Industriealuminiumgehäuse |
| Digitale Positionierer | 4 - 20 MA (HART) |
| Ventil-Einstellwert | 4-20mA, 450 Ohm Eingangswiderstand |
| Temperaturbereich | -40 ... +85 °C / -40 ... +185 °F |
|---|---|
| Schutzklasse | IP66 / NEMA 4X Gehäuse |
| Kommunikation | HART, FOUNDATION Feldbus |
| Zustand | Neu |
| Verpackung Informationen | Nach Bedarf |
| Genauigkeit | +/- 0,5% Volllaufzeit |
|---|---|
| Die Situation | Neues |
| Betriebstemperatur | -50°C bis +85°C |
| Luftversorgungsdruck | Einfachwirkende (von 1,4 bis 6,9 Bar), Doppelwirkende (von 1,4 bis 10,3 Bar) |
| Materialien | Kupferfreie Aluminiumgehäuse |
| Modellnummer | SVI II |
|---|---|
| Stromversorgung | 4 bis 20 mA |
| Signalkommunikation | HART 5 oder 7 über 4-20mA |
| Diagnosen | Standarddiagnostik, fortgeschrittene Diagnostik. |
| Digitale Ventilpositioniererart | Digital-Ventil-Stellwerk |
| Signalstrecke | 4 bis 20 MA · Zwei-Draht-Gerät, Umkehrpolaritätsschutz · Mindestspannweite 4 mA |
|---|---|
| Ventilbewegung | 3.6 bis 300 mm |
| Empfindlichkeit | ≤ 0,1% |
| Kommunikation | HART® |
| Ungefähres Gewicht | 3.5 kg (8,0 Pfund) |
| Die Situation | Neues |
|---|---|
| Luftlieferung | 280 SLPM @ 30psi |
| Stromversorgung | 4 bis 20 mA |
| Linearität | +/- 1 Prozent Vollskala |
| Pneumatik | Luft oder süßes Erdgas Reguliert und gefiltert |
| Zertifizierungen | CSA, FM, ATEX, IECEx, CUTR, Peso, KGS, INMETRO, NEPSI, TIIS, Erdgaszertifiziert |
|---|---|
| Kommunikationsprotokoll | HIRSCH, Entsprechung 4-20mA |
| Stromquelle | Lokal |
| Datenoberfläche | mit Kabel |
| Schalenmaterial | Industriealuminiumgehäuse |
| Positionssteuerung | Schwellungskontrolle, eingeschaltet/ausgeschaltet |
|---|---|
| Max Outlet Pressure | 145 psig |
| Zustand | neu und Ursprung |
| Zertifizierungen | CSA, FM, ATEX, IECEx, CUTR, Peso, KGS, INMETRO, NEPSI, TIIS, Erdgaszertifiziert |
| Gewährleistung | Ein Jahr |
| Versorgungs-Medien | Luft, Erdgas, Stickstoff |
|---|---|
| Kommunikationsprotokoll | HIRSCH, Entsprechung 4-20mA |
| Die Situation | neu und Ursprung |
| Prozesskontrolliert | Fluss, Druck, Temperatur, Niveau |
| Typ | Digital-Ventil-Stellwerk |
| Datenoberfläche | mit Kabel |
|---|---|
| Eingangssignal | Elektrisch |
| Positionssteuerung | Schwellungskontrolle, eingeschaltet/ausgeschaltet |
| Modellnummer | DVC6200 |
| Prozesskontrolliert | Fluss, Druck, Temperatur, Niveau |