| Betriebstemperatur | Standardtemperatur, hohe Temperatur |
|---|---|
| Empfindlichkeit | ≤ 0,1% |
| Ventilbewegung | 3.6 bis 300 mm |
| Kommunikation | HART® |
| Hysterese | ≤ 0,3 % |
| Wohnmaterial | Anodisierte Aluminiumlegierung Ein zusammengesetztes Polymer |
|---|---|
| Gewicht | 10,8 kg bis 3,4 kg |
| Versorgungsdruck | 1.4 bis 8 Bar |
| Versorgungs-Energie | 4-20 MA |
| Spannung max. | 30VDC |
| Positionskontrolle | Drosselnskontrolle, Ein/Aus |
|---|---|
| Max -Auslassdruck | 145 Psig |
| Zustand | Neu und Herkunft |
| Zertifizierungen | CSA, FM, ATEX, IECEX, CUTR, PESO, KGS, Inmetro, Nepsi, Tiis, Erdgas zertifiziert |
| Garantie | Ein Jahr |
| Eingang | 4-20 mA DC (Widerstand 300 Ω) |
|---|---|
| Kommunikation | HART6 (AVP102) |
| Luftversorgung | 140–700 kPa |
| Luftgebrauch | 4 L/min (N) einfachwirkend im Gleichgewicht |
| Maximaler Durchfluss | 110 L/min (N) einfachwirkend bei 400 kPa |
| Anwendung | General |
|---|---|
| Material | Casting |
| Temperatur von Medien | Mittlere Temperatur |
| Druck | Mitteldruck |
| Energie | Pneumatisch |
| Übereinstimmung/Linearitäten | ± 0,5% volle Spanne |
|---|---|
| Versorgungs-Druck-Effekt | 0,05% pro P-/ineinheit |
| Name | Masoneilan SVI FF |
| Funktionieren | -40° F bis 185° F (- 40° C zu 85° C) |
| Genauigkeit | ± 0,5% |
| Kommunikationsschnittstelle | HIRSCH, GRUNDLAGE Fieldbus, Profibus PA |
|---|---|
| Aktions-Zeit | 0.3-30 Sekunden |
| Bildschirm | Lcd-Bildschirm, der aktuelle Position, Machtstatus und andere Informationen anzeigen kann |
| Installations-Methode | Klammer-oder Flansch-Installation |
| Höchstleistungsdrehmoment | 600 Nanometer |
| Produktname | Pneumatische Teile ROTORK YTC SPTM-V6 SPTM-65V Smart Position Transmitter für Ventil |
|---|---|
| Marke | ROTORK YTC |
| Modell | SPTM-V6 SPTM-65V |
| Gefährliche Bereichs-Klassifikation | Ex h IIC Tx GB |
| Genauigkeit | 0,15 |
| Produktname | Pneumatische Teile ROTORK YTC SPTM-V6 SPTM-65V Smart Position Transmitter für Ventil |
|---|---|
| Marke | ROTORK YTC |
| Modell | SPTM-V6 SPTM-65V |
| Gefährliche Bereichs-Klassifikation | Ex h IIC Tx GB |
| Genauigkeit | 0,15 |