| Hysterese + DeadBand | +/- 0,3 Prozent Vollspann |
|---|---|
| Betriebstemperatur | -50°C bis +85°C |
| Typ | Digital-Ventil-Stellwerk |
| Materialien | Kupferfreie Aluminiumgehäuse |
| Signalkommunikation | HART 5 oder 7 über 4-20mA |
| Sollwert | 4 bis 20 mA |
|---|---|
| Ventilbewegung | 3.6 bis 300 mm |
| Öffnungswinkel | 24 bis 100° |
| Material | Stahl |
| Kommunikation | HART®-Feldkommunikationsprotokoll |
| Kommunikationsprotokoll | Hart, 4-20 mA Analog |
|---|---|
| Eingangssignal | Elektrisch |
| Betriebstemperatur | Standardtemperatur, hohe Temperatur |
| Versorgungsmedien | Luft, nicht ätzendes Gas |
| Max -Auslassdruck | 101 psig |
| Eingangsdruck | 1,4...6 bar |
|---|---|
| Höchsthysterese | 0.3% |
| Umgebungslufttemperatur für den Betrieb | -40...80 °C (-40...176 °F) |
| Kommunikationshafenprotokoll | HART, 4...20 mA Profibus FOUNDATION Fieldbus |
| Maximaler Druck | 6 bar, 90 psi |
| Ausgangsdruck | 3–15 psi (0,2–1,0 bar) |
|---|---|
| Temperaturbereich | -40 °C bis +82 °C |
| Gehege | IP66 |
| Versorgungsdruck | 30–150 psi (2,1–10,3 bar) |
| Eingangssignal | 4-20 ma dc |
| Betriebstemperatur | -55 ° C bis +85 ° C (-67 ° F bis +185 ° F) |
|---|---|
| Kommunikationsprotokoll | Analog, Hart, Foundation Fieldbus, diskrete I/O |
| Luftverbrauch | 0,3 SCFM (Standard); 0,075 SCFM (geringes Bluten) bei 60 psi |
| Ausgangskapazität | 18 SCFM bei 60 psi (Standard-/Low-Bleed-Relais) |
| Diagnostik | Ja |
| Mindest erforderlicher Betriebsstrom | 3,6 MA |
|---|---|
| Eingangsdruck-Strecke | 1,5 bis 6,0 bar |
| Wiederholbarkeit | <0,25% |
| Gewicht des Ventilpositionierers | 3,5 kg |
| Kommunikation | HART 5, 6 und 7 |
| Signal - Kommunikation | HIRSCH 7 über 4-20mA |
|---|---|
| Diagnostik | Stellungsregler-Diagnose/Erweiterte Diagnose/Online-Ventildiagnose |
| Bauwesen / Materialien | Kupferfreies Aluminiumgehäuse/optionales 316SS-Gehäuse |
| Betriebstemperatur | -55°C zu +85°C |
| Pneumatische Aktion | Einfachwirkend, ausfallsicher/rotierend und linear |
| Ventiltyp | Schmetterlingsventil mit Festdichtung |
|---|---|
| Modell des Ventils | D373H-25C |
| Druckstufe | 25c |
| Anwendung | Flüssigkeitskontrolle bei hohen Temperaturen |
| Betriebsmodus | Pneumatische Betätigung |
| Produktname | Überbrückungsventil KOSO CL-523H Absperrventil |
|---|---|
| Marke | Koso |
| Modell | CL-523H |
| Material | Legierung/Stahl |
| Ventilstil | Positionierer |