| Produktname | China Druckbalancierte Käfigregelung |
|---|---|
| NOMINALEN Druck | PN16/25/40/63/100 |
| Fließeigenschaften | Gleichprozentig, linear, schnell öffnend |
| Durchsickern-Klasse | ANSI B16.104: IV, V, VI |
| Material der Ventilkarosserie | Kohlenstoffstahl |
| Anwendung | General |
|---|---|
| Material | Casting |
| Temperatur von Medien | Mittlere Temperatur |
| Druck | Mitteldruck |
| Energie | Pneumatisch |
| Produktbezeichnung | Flowserve 520MD Digitalventil-Stellungsregler |
|---|---|
| Luftfeuchtigkeit | 0-100% Nicht kondensierend |
| Spannungszufuhr (maximal) | 30 VDC |
| Gewicht des Ventilpositionierers | 3,5 Kilogramm |
| Wiederholbarkeit | < 0=""> |
| Gewicht | 8.3 Pfund (3,9 kg) Aluminium 20,5 Pfund (9,3 kg) Edelstahl |
|---|---|
| Wohnmaterial | Gegossenes, pulverfarbtes Aluminium, Edelstahl |
| Stromversorgung | Zwei Leitungen, 4-20 MA 10,0 bis 30,0 VDC |
| Modellnummer | Logix 3200MD Digitale HART-Positioner |
| Konformitätsspannung | 10.0 VDC @ 20 MA |
| Type | Digital valve positioner |
|---|---|
| Storage Temperature Limits | -58°F to 200°F (-50°C to 93°C) |
| Relative Humidity | 10 to 90% non-condensing |
| Supply Pressure Effect | 0.05% per psi |
| Valve type | Ball valve, butterfly valve, Check valve, Gate valve, globe valve, Diaphragm valve |
| Aktionsrichtung | Reversibel |
|---|---|
| Hysterese | ≤ 0,3 % |
| Signalbereich | 4 bis 20 mA |
| Medien | Gas |
| Mindeststrom | 3.6 MA für die Anzeige 3.8 MA für den Betrieb |
| Kommunikationsprotokoll | 4 bis 20 MA HART |
|---|---|
| Ausgangssignal | Luftdruck bis 145 psig (10 bar) |
| Schutzbewertung | IP66/IP67 |
| Stromversorgung | 24 V Gleichstrom |
| Diagnosefunktionen | Echtzeitüberwachung des Zustands und Leistungsdiagnostik der Ventile |
| Gewicht | 2,25 kg bis 9,9 kg je nach Modellvariante |
|---|---|
| Montagekompatibilität | Rotary/Lineare Aktuatoren |
| Protokolle | Hart 5/7, Foundation Fieldbus, Profibus PA |
| Umgebungstemperatur | -20 ° C bis +85 ° C (Standard); Optionen bis zu -55 ° C verfügbar |
| Ventiltyp | Steuerventil |
| Eingangssignal | 3–15 psi und 4–20 mA |
|---|---|
| Betriebstemperatur | -20°C bis 70°C |
| Versorgungsdruck | 2,5-7 bar |
| Luftverbrauch | 1,02 Nm³/h bei 400 kPa |
| CV Max. Niedriger Durchfluss | 0,34 (Einlass und Auslass 1/4") |
| Aktorenbereich | 160 Cm2 · 320 Cm2 |
|---|---|
| Wiederholbarkeit | ≤0.25% |
| Kommunikationsprotokoll | HART |
| Auflösung | ≤ 0,25% |
| Connectin | 1 / 4 NPT |